Overall sign dimensions: 590 Millimetres; Width: 700 Millimetres; Depth: 10 Millimetres
Neon – Race Circuit – 16 Bright custom colours available on check out.

Have your favourite Formula 1, Moto GP, race car, motocross circuit in UK and worldwide made in LED Neon !
PLEASE NOTE these circuits come with 19mm satin silver stand off wall studs as standard to fit onto your wall.

If you do not see your circuit on our website, please email us with your request.
We can manufacture to any layout needed.

( You may need to supply drawing if we can not find your circuit online )

Fitting your circuit is very simple ( there is also a diagram above in the product images )

– Simply position your circuit where you would like it on your wall and mark the wall stud hole centres.
– Drill and plug the wall.
– Then place a screw inside the wall stud barrel and screw into your new wall plug in the wall ( screws and plugs not supplied )
– Fit you circuit using the wall stud head through the hole in the acrylic circuit into your wall studs barrel on the wall already
– Plug in, stand back and enjoy !

Cost shown also includes shipping to any UK Mainland address.

Feel inspired to have your own inspirational message immortalised as a neon light? Send us a message directly or design your own personalised neon sign.


Neon – Thruxton race circuit



Neon Works sign specifications:

All of our neon signs are for interior use. But do not worry, if needed for outside please choose the ” exterior sealed acrylic box ” option on check out. ( May not be available on some of our neon signs )

Each of our products are completely bespoke and manufactured by our own sign writer in our Yorkshire workshop, just outside Huddersfield. All of our neon signs use 24v LEDs which are firstly mounted inside a robust 8mm clear acrylic back panel, before being covered with coloured silicone. There are 16 vibrant colours to choose from, and we use 12mm wide silicone.

Due to limitations of the coloured silicone there is a letter cap height minimum of 70mm, in order to accommodate bending and shaping.

Your neon sign comes with a CNC contour cut back panel from 8mm clear acrylic with beautifully flame polished edges to further enhance and refract the light. Each of our bespoke neon signs comes with ” keyhole ” slots pre-drilled in back panel ( unless specified otherwise on checkout ) towards the top to enable you to easily fix to a wall or hang in a window. We also provide 4.2 metres of cable which is attached to a small LED driver and a UK plug.

You can add even more effects to your neon sign with a controller / dimmer. Not only does this allow you to adjust the brightness, but it also enables you to choose different flash modes of varying speeds.

We can add a base and make your design into a freestanding neon lamp too! For those looking for the ultimate retro neon effect, signs can also be housed in a clear acrylic box – just like the old days! These boxes enable you sign to be used inside or outside. Please see the options on check out.

Customised Neon Signs

All our neon signs have been drawn exclusively by our in house designer. If you require any changes to the specification of your neon sign or require a bespoke design please just let us know.All our neon signs are hand made here at Neon Works in Yorkshire and we can accomodate most bespoke design requirements.

Adaptor Included

Your neon sign comes supplied with a 2m long ” clear jacket ” cable which has a push fit connector which fits into a 1.1m long black cable to a 24 volt power supply. The power supply itself is a small black box ( 6cm x 13cm x 3cm ) this then includes a black mains cable at 1.5m long to a UK plug as standard. Total length of cable from you neon sign comes to 4.6m. This length of cable should be plenty to position your neon sign where you need it. If a longer length of cable is needed please let us know. Longer length cable are subject to additional cost.


All sign prices shown include free UK mainland shipping. If shipment outside of UK mainland then additional cost will apply. Please email us with the address outside UK mainland and the item you would like to buy and we will give a new shipping cost. Orders usually take 1-2 weeks, including production and shipping. If you are local you can collect from Neon Works and also take a tour of our showroom !

12 Months Warranty

Each sign comes with a return to base 12-month manufacturer warranty covering faulty items (for indoor use only). Any issues or technical advice with your sign just let us know and we are here to help.

Easy to install

Install of your neon sign is very easy. All our LED neon signs have a back panel which is CNC cut from 8mm clear acrylic. Which ever fixings your sign comes with you can hold your sign up in its fixing position and mark the holes needed to fix your sign in place. If unsure at all we are here to help !

Create your own sign

Design now

Neon signs shop

Browse the Collection


Find Out More


Make an enquiry

Your Basket